List of Waypoint Console Commands

From NFBSP

Contents 1 Basic Waypoint Commands 2 Auto Waypoint Commands 3 Path Waypoint Commands 4 Waypoint Tags

Basic Waypoint Commands

sv_waypoint [0|1]	"0" disables waypoint editing; "1" enables waypoint editing.
waypoint [off|on]	"Off" disables the drawing of waypoints; "on" enables the drawing of waypoints.
waypoint load	Load the waypoint data from a file. This file will be loaded from the 'mapname.wpt' file in your bond/maps folder.
waypoint save	Save all the map waypoint data. This file will be written in your bond/maps folder, named 'mapname.wpt'.
waypoint add	Creates a waypoint.
waypoint delete	Deletes the waypoint you're standing near.

Auto Waypoint Commands

autowaypoint [on|off]

When you enable this command Nightfire will automaticly create a waypoint path behind the player. "On" enables the auto-generation of waypoints; "off" disables the auto-generation of waypoints.

Path Waypoint Commands

pathwaypoint [enable|disable]	Enable or disable drawing paths between waypoints making editing much easier.
pathwaypoint create1	This command will set the waypoint you are standing near as the starting position for a new connection between two waypoints.
pathwaypoint create2	This command will set the waypoint you are standing near as the end position and connect it to the starting waypoint.
pathwaypoint remove1	This command will set the waypoint you are standing near as the starting position to remove a path between two waypoints.
pathwaypoint remove2	This command will set the waypoint you are standing near as the end position to remove a path between two waypoints and remove the path between them.

Waypoint Tags

waypoint tag	Show a list with all the waypoint tags.
waypoint tag [number]	Give the waypoint you are near to a tag. For example when you give it the duck tag, bots will duck when they are walking to the waypoint's position.